How to Root Tecno Camon C8 Android Device Without Stress.

Filed in How Tos, ROOT, Tecno by on February 22, 2017 0 Comments

How to Root Tecno Camon C8 Android Device Without Stress.

REQUIREMENT
*Pc & Internet connection
*Sp flash tools
*Focus

STEPs

1. Download SuperSU.zip here

2. Move SuperSU.zip to phone’s SD card

3. Download the ported TWRP for Tecno C8
here (Credits to Team Hovatek)

4. Unzip the TWRP zip file.

5. Download SP Flash tools here then flash the recovery image into your Tecno Camon C8 via flash tool

6. Done flashing, boot the phone into TWRP recovery mode (by Holding the Volume Up + Power button for 5 seconds)

7. In the recovery, Choose install zip from sdcard (to Choose zip from sdcard use volume up and down navigate up and down then choose the Supersu.zip file from the root of your sdcard.)

8. Scroll to yes and install, after a successful flashing go back and reboot your device.

Method2

STEPs

1. Download SuperSU.zip file here

2. Copy/Move file to SD card.

3. Power off your android device.

4. Boot to recovery , to do that hold down Power button + Volume up , (it may differ in other android device running the same chipset)

5. Navigate and select Recovery mode ( Volume up = Navigate while Volume down = Select )

6. Navigate and select “ Apply update from SD card ” ( Volume up & down = navigate while
Power button = Select )

7. Select zip file you copied/moved to your SD card.

8. After flashing the zip file, it will automatically take you back to Recovery screen.

9. Navigate and click Reboot system.

10. That’s all, after reboot, SU must have been flashed into your device.

HOW TO CHANGE TECNO CAMON C8 IMEI.

Note: Root access not required to change imei number.

STEPs:

1. Download and install MTK engineering mode from Google Play store.
2. Open and click on MTK Settings.
3. Navigate to connectivity .
4. Select CDS information .
5. Select Radio Information .
6. Choose either Phone 1 or 2.
For Phone 1 : “AT+ EGMR=1,7,”YOUR NEW IMEI NO”
For Phone 2 : “AT+ EGMR=1,10,”YOUR NEW IMEI NO” Make sure you add a space in between AT+ and EGMR

7. Press the “ Send At Command ” (You should receive a message that your ‘AT command sent)

8. Reboot and dial *#06# to confirm your new IMEI.

http://feeds.feedburner.com/flyerstech

About the Author ()

My Name is Chukwuebuka Ogbuchi , a passionate blogger with full interest in making the world a better place for the tech lovers in the society at large,our main aim is to help and solve any related technology issues.

Leave a Reply